ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / src / kernels / 5.14.0-611.49.2.el9_7.x86_64 / include / linux

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 *  Universal power supply monitor class
 *
 *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
 *  Copyright © 2004  Szabolcs Gyurko
 *  Copyright © 2003  Ian Molton <spyro@f2s.com>
 *
 *  Modified: 2004, Oct     Szabolcs Gyurko
 */

#ifndef __LINUX_POWER_SUPPLY_H__
#define __LINUX_POWER_SUPPLY_H__

#include <linux/device.h>
#include <linux/workqueue.h>
#include <linux/leds.h>
#include <linux/spinlock.h>
#include <linux/notifier.h>

/*
 * All voltages, currents, charges, energies, time and temperatures in uV,
 * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
 * stated. It's driver's job to convert its raw values to units in which
 * this class operates.
 */

/*
 * For systems where the charger determines the maximum battery capacity
 * the min and max fields should be used to present these values to user
 * space. Unused/unknown fields will not appear in sysfs.
 */

enum {
	POWER_SUPPLY_STATUS_UNKNOWN = 0,
	POWER_SUPPLY_STATUS_CHARGING,
	POWER_SUPPLY_STATUS_DISCHARGING,
	POWER_SUPPLY_STATUS_NOT_CHARGING,
	POWER_SUPPLY_STATUS_FULL,
};

/* What algorithm is the charger using? */
enum {
	POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0,
	POWER_SUPPLY_CHARGE_TYPE_NONE,
	POWER_SUPPLY_CHARGE_TYPE_TRICKLE,	/* slow speed */
	POWER_SUPPLY_CHARGE_TYPE_FAST,		/* fast speed */
	POWER_SUPPLY_CHARGE_TYPE_STANDARD,	/* normal speed */
	POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE,	/* dynamically adjusted speed */
	POWER_SUPPLY_CHARGE_TYPE_CUSTOM,	/* use CHARGE_CONTROL_* props */
	POWER_SUPPLY_CHARGE_TYPE_LONGLIFE,	/* slow speed, longer life */
	POWER_SUPPLY_CHARGE_TYPE_BYPASS,	/* bypassing the charger */
};

enum {
	POWER_SUPPLY_HEALTH_UNKNOWN = 0,
	POWER_SUPPLY_HEALTH_GOOD,
	POWER_SUPPLY_HEALTH_OVERHEAT,
	POWER_SUPPLY_HEALTH_DEAD,
	POWER_SUPPLY_HEALTH_OVERVOLTAGE,
	POWER_SUPPLY_HEALTH_UNSPEC_FAILURE,
	POWER_SUPPLY_HEALTH_COLD,
	POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE,
	POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE,
	POWER_SUPPLY_HEALTH_OVERCURRENT,
	POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED,
	POWER_SUPPLY_HEALTH_WARM,
	POWER_SUPPLY_HEALTH_COOL,
	POWER_SUPPLY_HEALTH_HOT,
	POWER_SUPPLY_HEALTH_NO_BATTERY,
};

enum {
	POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0,
	POWER_SUPPLY_TECHNOLOGY_NiMH,
	POWER_SUPPLY_TECHNOLOGY_LION,
	POWER_SUPPLY_TECHNOLOGY_LIPO,
	POWER_SUPPLY_TECHNOLOGY_LiFe,
	POWER_SUPPLY_TECHNOLOGY_NiCd,
	POWER_SUPPLY_TECHNOLOGY_LiMn,
};

enum {
	POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
	POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
	POWER_SUPPLY_CAPACITY_LEVEL_LOW,
	POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
	POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
	POWER_SUPPLY_CAPACITY_LEVEL_FULL,
};

enum {
	POWER_SUPPLY_SCOPE_UNKNOWN = 0,
	POWER_SUPPLY_SCOPE_SYSTEM,
	POWER_SUPPLY_SCOPE_DEVICE,
};

enum power_supply_property {
	/* Properties of type `int' */
	POWER_SUPPLY_PROP_STATUS = 0,
	POWER_SUPPLY_PROP_CHARGE_TYPE,
	POWER_SUPPLY_PROP_HEALTH,
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_ONLINE,
	POWER_SUPPLY_PROP_AUTHENTIC,
	POWER_SUPPLY_PROP_TECHNOLOGY,
	POWER_SUPPLY_PROP_CYCLE_COUNT,
	POWER_SUPPLY_PROP_VOLTAGE_MAX,
	POWER_SUPPLY_PROP_VOLTAGE_MIN,
	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_VOLTAGE_AVG,
	POWER_SUPPLY_PROP_VOLTAGE_OCV,
	POWER_SUPPLY_PROP_VOLTAGE_BOOT,
	POWER_SUPPLY_PROP_CURRENT_MAX,
	POWER_SUPPLY_PROP_CURRENT_NOW,
	POWER_SUPPLY_PROP_CURRENT_AVG,
	POWER_SUPPLY_PROP_CURRENT_BOOT,
	POWER_SUPPLY_PROP_POWER_NOW,
	POWER_SUPPLY_PROP_POWER_AVG,
	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
	POWER_SUPPLY_PROP_CHARGE_FULL,
	POWER_SUPPLY_PROP_CHARGE_EMPTY,
	POWER_SUPPLY_PROP_CHARGE_NOW,
	POWER_SUPPLY_PROP_CHARGE_AVG,
	POWER_SUPPLY_PROP_CHARGE_COUNTER,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
	POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD, /* in percents! */
	POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD, /* in percents! */
	POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR,
	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
	POWER_SUPPLY_PROP_INPUT_POWER_LIMIT,
	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
	POWER_SUPPLY_PROP_ENERGY_FULL,
	POWER_SUPPLY_PROP_ENERGY_EMPTY,
	POWER_SUPPLY_PROP_ENERGY_NOW,
	POWER_SUPPLY_PROP_ENERGY_AVG,
	POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
	POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, /* in percents! */
	POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */
	POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, /* in percents! */
	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
	POWER_SUPPLY_PROP_TEMP,
	POWER_SUPPLY_PROP_TEMP_MAX,
	POWER_SUPPLY_PROP_TEMP_MIN,
	POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
	POWER_SUPPLY_PROP_TEMP_AMBIENT,
	POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN,
	POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX,
	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
	POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */
	POWER_SUPPLY_PROP_USB_TYPE,
	POWER_SUPPLY_PROP_SCOPE,
	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
	POWER_SUPPLY_PROP_CALIBRATE,
	POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
	POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
	POWER_SUPPLY_PROP_MANUFACTURE_DAY,
	/* Properties of type `const char *' */
	POWER_SUPPLY_PROP_MODEL_NAME,
	POWER_SUPPLY_PROP_MANUFACTURER,
	POWER_SUPPLY_PROP_SERIAL_NUMBER,
};

enum power_supply_type {
	POWER_SUPPLY_TYPE_UNKNOWN = 0,
	POWER_SUPPLY_TYPE_BATTERY,
	POWER_SUPPLY_TYPE_UPS,
	POWER_SUPPLY_TYPE_MAINS,
	POWER_SUPPLY_TYPE_USB,			/* Standard Downstream Port */
	POWER_SUPPLY_TYPE_USB_DCP,		/* Dedicated Charging Port */
	POWER_SUPPLY_TYPE_USB_CDP,		/* Charging Downstream Port */
	POWER_SUPPLY_TYPE_USB_ACA,		/* Accessory Charger Adapters */
	POWER_SUPPLY_TYPE_USB_TYPE_C,		/* Type C Port */
	POWER_SUPPLY_TYPE_USB_PD,		/* Power Delivery Port */
	POWER_SUPPLY_TYPE_USB_PD_DRP,		/* PD Dual Role Port */
	POWER_SUPPLY_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */
	POWER_SUPPLY_TYPE_WIRELESS,		/* Wireless */
};

enum power_supply_usb_type {
	POWER_SUPPLY_USB_TYPE_UNKNOWN = 0,
	POWER_SUPPLY_USB_TYPE_SDP,		/* Standard Downstream Port */
	POWER_SUPPLY_USB_TYPE_DCP,		/* Dedicated Charging Port */
	POWER_SUPPLY_USB_TYPE_CDP,		/* Charging Downstream Port */
	POWER_SUPPLY_USB_TYPE_ACA,		/* Accessory Charger Adapters */
	POWER_SUPPLY_USB_TYPE_C,		/* Type C Port */
	POWER_SUPPLY_USB_TYPE_PD,		/* Power Delivery Port */
	POWER_SUPPLY_USB_TYPE_PD_DRP,		/* PD Dual Role Port */
	POWER_SUPPLY_USB_TYPE_PD_PPS,		/* PD Programmable Power Supply */
	POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */
};

enum power_supply_charge_behaviour {
	POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO = 0,
	POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE,
	POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE,
};

enum power_supply_notifier_events {
	PSY_EVENT_PROP_CHANGED,
};

union power_supply_propval {
	int intval;
	const char *strval;
};

struct device_node;
struct power_supply;

/* Run-time specific power supply configuration */
struct power_supply_config {
	struct device_node *of_node;
	struct fwnode_handle *fwnode;

/* Driver private data */
	void *drv_data;

/* Device specific sysfs attributes */
	const struct attribute_group **attr_grp;

char **supplied_to;
	size_t num_supplicants;
};

/* Description of power supply */
struct power_supply_desc {
	const char *name;
	enum power_supply_type type;
	u8 charge_behaviours;
	u32 usb_types;
	const enum power_supply_property *properties;
	size_t num_properties;

/*
	 * Functions for drivers implementing power supply class.
	 * These shouldn't be called directly by other drivers for accessing
	 * this power supply. Instead use power_supply_*() functions (for
	 * example power_supply_get_property()).
	 */
	int (*get_property)(struct power_supply *psy,
			    enum power_supply_property psp,
			    union power_supply_propval *val);
	int (*set_property)(struct power_supply *psy,
			    enum power_supply_property psp,
			    const union power_supply_propval *val);
	/*
	 * property_is_writeable() will be called during registration
	 * of power supply. If this happens during device probe then it must
	 * not access internal data of device (because probe did not end).
	 */
	int (*property_is_writeable)(struct power_supply *psy,
				     enum power_supply_property psp);
	void (*external_power_changed)(struct power_supply *psy);
	void (*set_charged)(struct power_supply *psy);

/*
	 * Set if thermal zone should not be created for this power supply.
	 * For example for virtual supplies forwarding calls to actual
	 * sensors or other supplies.
	 */
	bool no_thermal;
	/* For APM emulation, think legacy userspace. */
	int use_for_apm;
};

struct power_supply {
	const struct power_supply_desc *desc;

char **supplied_to;
	size_t num_supplicants;

char **supplied_from;
	size_t num_supplies;
	struct device_node *of_node;

/* Driver private data */
	void *drv_data;

/* private */
	struct device dev;
	struct work_struct changed_work;
	struct delayed_work deferred_register_work;
	spinlock_t changed_lock;
	bool changed;
	bool initialized;
	bool removing;
	atomic_t use_cnt;
	struct power_supply_battery_info *battery_info;
#ifdef CONFIG_THERMAL
	struct thermal_zone_device *tzd;
	struct thermal_cooling_device *tcd;
#endif

#ifdef CONFIG_LEDS_TRIGGERS
	struct led_trigger *charging_full_trig;
	char *charging_full_trig_name;
	struct led_trigger *charging_trig;
	char *charging_trig_name;
	struct led_trigger *full_trig;
	char *full_trig_name;
	struct led_trigger *online_trig;
	char *online_trig_name;
	struct led_trigger *charging_blink_full_solid_trig;
	char *charging_blink_full_solid_trig_name;
#endif
};

/*
 * This is recommended structure to specify static power supply parameters.
 * Generic one, parametrizable for different power supplies. Power supply
 * class itself does not use it, but that's what implementing most platform
 * drivers, should try reuse for consistency.
 */

struct power_supply_info {
	const char *name;
	int technology;
	int voltage_max_design;
	int voltage_min_design;
	int charge_full_design;
	int charge_empty_design;
	int energy_full_design;
	int energy_empty_design;
	int use_for_apm;
};

struct power_supply_battery_ocv_table {
	int ocv;	/* microVolts */
	int capacity;	/* percent */
};

struct power_supply_resistance_temp_table {
	int temp;	/* celsius */
	int resistance;	/* internal resistance percent */
};

struct power_supply_vbat_ri_table {
	int vbat_uv;	/* Battery voltage in microvolt */
	int ri_uohm;	/* Internal resistance in microohm */
};

/**
 * struct power_supply_maintenance_charge_table - setting for maintenace charging
 * @charge_current_max_ua: maintenance charging current that is used to keep
 *   the charge of the battery full as current is consumed after full charging.
 *   The corresponding charge_voltage_max_uv is used as a safeguard: when we
 *   reach this voltage the maintenance charging current is turned off. It is
 *   turned back on if we fall below this voltage.
 * @charge_voltage_max_uv: maintenance charging voltage that is usually a bit
 *   lower than the constant_charge_voltage_max_uv. We can apply this settings
 *   charge_current_max_ua until we get back up to this voltage.
 * @safety_timer_minutes: maintenance charging safety timer, with an expiry
 *   time in minutes. We will only use maintenance charging in this setting
 *   for a certain amount of time, then we will first move to the next
 *   maintenance charge current and voltage pair in respective array and wait
 *   for the next safety timer timeout, or, if we reached the last maintencance
 *   charging setting, disable charging until we reach
 *   charge_restart_voltage_uv and restart ordinary CC/CV charging from there.
 *   These timers should be chosen to align with the typical discharge curve
 *   for the battery.
 *
 * When the main CC/CV charging is complete the battery can optionally be
 * maintenance charged at the voltages from this table: a table of settings is
 * traversed using a slightly lower current and voltage than what is used for
 * CC/CV charging. The maintenance charging will for safety reasons not go on
 * indefinately: we lower the current and voltage with successive maintenance
 * settings, then disable charging completely after we reach the last one,
 * and after that we do not restart charging until we reach
 * charge_restart_voltage_uv (see struct power_supply_battery_info) and restart
 * ordinary CC/CV charging from there.
 *
 * As an example, a Samsung EB425161LA Lithium-Ion battery is CC/CV charged
 * at 900mA to 4340mV, then maintenance charged at 600mA and 4150mV for
 * 60 hours, then maintenance charged at 600mA and 4100mV for 200 hours.
 * After this the charge cycle is restarted waiting for
 * charge_restart_voltage_uv.
 *
 * For most mobile electronics this type of maintenance charging is enough for
 * the user to disconnect the device and make use of it before both maintenance
 * charging cycles are complete.
 */
struct power_supply_maintenance_charge_table {
	int charge_current_max_ua;
	int charge_voltage_max_uv;
	int charge_safety_timer_minutes;
};

#define POWER_SUPPLY_OCV_TEMP_MAX 20

/**
 * struct power_supply_battery_info - information about batteries
 * @technology: from the POWER_SUPPLY_TECHNOLOGY_* enum
 * @energy_full_design_uwh: energy content when fully charged in microwatt
 *   hours
 * @charge_full_design_uah: charge content when fully charged in microampere
 *   hours
 * @voltage_min_design_uv: minimum voltage across the poles when the battery
 *   is at minimum voltage level in microvolts. If the voltage drops below this
 *   level the battery will need precharging when using CC/CV charging.
 * @voltage_max_design_uv: voltage across the poles when the battery is fully
 *   charged in microvolts. This is the "nominal voltage" i.e. the voltage
 *   printed on the label of the battery.
 * @tricklecharge_current_ua: the tricklecharge current used when trickle
 *   charging the battery in microamperes. This is the charging phase when the
 *   battery is completely empty and we need to carefully trickle in some
 *   charge until we reach the precharging voltage.
 * @precharge_current_ua: current to use in the precharge phase in microamperes,
 *   the precharge rate is limited by limiting the current to this value.
 * @precharge_voltage_max_uv: the maximum voltage allowed when precharging in
 *   microvolts. When we pass this voltage we will nominally switch over to the
 *   CC (constant current) charging phase defined by constant_charge_current_ua
 *   and constant_charge_voltage_max_uv.
 * @charge_term_current_ua: when the current in the CV (constant voltage)
 *   charging phase drops below this value in microamperes the charging will
 *   terminate completely and not restart until the voltage over the battery
 *   poles reach charge_restart_voltage_uv unless we use maintenance charging.
 * @charge_restart_voltage_uv: when the battery has been fully charged by
 *   CC/CV charging and charging has been disabled, and the voltage subsequently
 *   drops below this value in microvolts, the charging will be restarted
 *   (typically using CV charging).
 * @overvoltage_limit_uv: If the voltage exceeds the nominal voltage
 *   voltage_max_design_uv and we reach this voltage level, all charging must
 *   stop and emergency procedures take place, such as shutting down the system
 *   in some cases.
 * @constant_charge_current_max_ua: current in microamperes to use in the CC
 *   (constant current) charging phase. The charging rate is limited
 *   by this current. This is the main charging phase and as the current is
 *   constant into the battery the voltage slowly ascends to
 *   constant_charge_voltage_max_uv.
 * @constant_charge_voltage_max_uv: voltage in microvolts signifying the end of
 *   the CC (constant current) charging phase and the beginning of the CV
 *   (constant voltage) charging phase.
 * @maintenance_charge: an array of maintenance charging settings to be used
 *   after the main CC/CV charging phase is complete.
 * @maintenance_charge_size: the number of maintenance charging settings in
 *   maintenance_charge.
 * @alert_low_temp_charge_current_ua: The charging current to use if the battery
 *   enters low alert temperature, i.e. if the internal temperature is between
 *   temp_alert_min and temp_min. No matter the charging phase, this
 *   and alert_high_temp_charge_voltage_uv will be applied.
 * @alert_low_temp_charge_voltage_uv: Same as alert_low_temp_charge_current_ua,
 *   but for the charging voltage.
 * @alert_high_temp_charge_current_ua: The charging current to use if the
 *   battery enters high alert temperature, i.e. if the internal temperature is
 *   between temp_alert_max and temp_max. No matter the charging phase, this
 *   and alert_high_temp_charge_voltage_uv will be applied, usually lowering
 *   the charging current as an evasive manouver.
 * @alert_high_temp_charge_voltage_uv: Same as
 *   alert_high_temp_charge_current_ua, but for the charging voltage.
 * @factory_internal_resistance_uohm: the internal resistance of the battery
 *   at fabrication time, expressed in microohms. This resistance will vary
 *   depending on the lifetime and charge of the battery, so this is just a
 *   nominal ballpark figure. This internal resistance is given for the state
 *   when the battery is discharging.
 * @factory_internal_resistance_charging_uohm: the internal resistance of the
 *   battery at fabrication time while charging, expressed in microohms.
 *   The charging process will affect the internal resistance of the battery
 *   so this value provides a better resistance under these circumstances.
 *   This resistance will vary depending on the lifetime and charge of the
 *   battery, so this is just a nominal ballpark figure.
 * @ocv_temp: array indicating the open circuit voltage (OCV) capacity
 *   temperature indices. This is an array of temperatures in degrees Celsius
 *   indicating which capacity table to use for a certain temperature, since
 *   the capacity for reasons of chemistry will be different at different
 *   temperatures. Determining capacity is a multivariate problem and the
 *   temperature is the first variable we determine.
 * @temp_ambient_alert_min: the battery will go outside of operating conditions
 *   when the ambient temperature goes below this temperature in degrees
 *   Celsius.
 * @temp_ambient_alert_max: the battery will go outside of operating conditions
 *   when the ambient temperature goes above this temperature in degrees
 *   Celsius.
 * @temp_alert_min: the battery should issue an alert if the internal
 *   temperature goes below this temperature in degrees Celsius.
 * @temp_alert_max: the battery should issue an alert if the internal
 *   temperature goes above this temperature in degrees Celsius.
 * @temp_min: the battery will go outside of operating conditions when
 *   the internal temperature goes below this temperature in degrees Celsius.
 *   Normally this means the system should shut down.
 * @temp_max: the battery will go outside of operating conditions when
 *   the internal temperature goes above this temperature in degrees Celsius.
 *   Normally this means the system should shut down.
 * @ocv_table: for each entry in ocv_temp there is a corresponding entry in
 *   ocv_table and a size for each entry in ocv_table_size. These arrays
 *   determine the capacity in percent in relation to the voltage in microvolts
 *   at the indexed temperature.
 * @ocv_table_size: for each entry in ocv_temp this array is giving the size of
 *   each entry in the array of capacity arrays in ocv_table.
 * @resist_table: this is a table that correlates a battery temperature to the
 *   expected internal resistance at this temperature. The resistance is given
 *   as a percentage of factory_internal_resistance_uohm. Knowing the
 *   resistance of the battery is usually necessary for calculating the open
 *   circuit voltage (OCV) that is then used with the ocv_table to calculate
 *   the capacity of the battery. The resist_table must be ordered descending
 *   by temperature: highest temperature with lowest resistance first, lowest
 *   temperature with highest resistance last.
 * @resist_table_size: the number of items in the resist_table.
 * @vbat2ri_discharging: this is a table that correlates Battery voltage (VBAT)
 *   to internal resistance (Ri). The resistance is given in microohm for the
 *   corresponding voltage in microvolts. The internal resistance is used to
 *   determine the open circuit voltage so that we can determine the capacity
 *   of the battery. These voltages to resistance tables apply when the battery
 *   is discharging. The table must be ordered descending by voltage: highest
 *   voltage first.
 * @vbat2ri_discharging_size: the number of items in the vbat2ri_discharging
 *   table.
 * @vbat2ri_charging: same function as vbat2ri_discharging but for the state
 *   when the battery is charging. Being under charge changes the battery's
 *   internal resistance characteristics so a separate table is needed.*
 *   The table must be ordered descending by voltage: highest voltage first.
 * @vbat2ri_charging_size: the number of items in the vbat2ri_charging
 *   table.
 * @bti_resistance_ohm: The Battery Type Indicator (BIT) nominal resistance
 *   in ohms for this battery, if an identification resistor is mounted
 *   between a third battery terminal and ground. This scheme is used by a lot
 *   of mobile device batteries.
 * @bti_resistance_tolerance: The tolerance in percent of the BTI resistance,
 *   for example 10 for +/- 10%, if the bti_resistance is set to 7000 and the
 *   tolerance is 10% we will detect a proper battery if the BTI resistance
 *   is between 6300 and 7700 Ohm.
 *
 * This is the recommended struct to manage static battery parameters,
 * populated by power_supply_get_battery_info(). Most platform drivers should
 * use these for consistency.
 *
 * Its field names must correspond to elements in enum power_supply_property.
 * The default field value is -EINVAL or NULL for pointers.
 *
 * CC/CV CHARGING:
 *
 * The charging parameters here assume a CC/CV charging scheme. This method
 * is most common with Lithium Ion batteries (other methods are possible) and
 * looks as follows:
 *
 * ^ Battery voltage
 * |                                               --- overvoltage_limit_uv
 * |
 * |                    ...................................................
 * |                 .. constant_charge_voltage_max_uv
 * |              ..
 * |             .
 * |            .
 * |           .
 * |          .
 * |         .
 * |     .. precharge_voltage_max_uv
 * |  ..
 * |. (trickle charging)
 * +------------------------------------------------------------------> time
 *
 * ^ Current into the battery
 * |
 * |      ............. constant_charge_current_max_ua
 * |      .            .
 * |      .             .
 * |      .              .
 * |      .               .
 * |      .                ..
 * |      .                  ....
 * |      .                       .....
 * |    ... precharge_current_ua       .......  charge_term_current_ua
 * |    .                                    .
 * |    .                                    .
 * |.... tricklecharge_current_ua            .
 * |                                         .
 * +-----------------------------------------------------------------> time
 *
 * These diagrams are synchronized on time and the voltage and current
 * follow each other.
 *
 * With CC/CV charging commence over time like this for an empty battery:
 *
 * 1. When the battery is completely empty it may need to be charged with
 *    an especially small current so that electrons just "trickle in",
 *    this is the tricklecharge_current_ua.
 *
 * 2. Next a small initial pre-charge current (precharge_current_ua)
 *    is applied if the voltage is below precharge_voltage_max_uv until we
 *    reach precharge_voltage_max_uv. CAUTION: in some texts this is referred
 *    to as "trickle charging" but the use in the Linux kernel is different
 *    see below!
 *
 * 3. Then the main charging current is applied, which is called the constant
 *    current (CC) phase. A current regulator is set up to allow
 *    constant_charge_current_max_ua of current to flow into the battery.
 *    The chemical reaction in the battery will make the voltage go up as
 *    charge goes into the battery. This current is applied until we reach
 *    the constant_charge_voltage_max_uv voltage.
 *
 * 4. At this voltage we switch over to the constant voltage (CV) phase. This
 *    means we allow current to go into the battery, but we keep the voltage
 *    fixed. This current will continue to charge the battery while keeping
 *    the voltage the same. A chemical reaction in the battery goes on
 *    storing energy without affecting the voltage. Over time the current
 *    will slowly drop and when we reach charge_term_current_ua we will
 *    end the constant voltage phase.
 *
 * After this the battery is fully charged, and if we do not support maintenance
 * charging, the charging will not restart until power dissipation makes the
 * voltage fall so that we reach charge_restart_voltage_uv and at this point
 * we restart charging at the appropriate phase, usually this will be inside
 * the CV phase.
 *
 * If we support maintenance charging the voltage is however kept high after
 * the CV phase with a very low current. This is meant to let the same charge
 * go in for usage while the charger is still connected, mainly for
 * dissipation for the power consuming entity while connected to the
 * charger.
 *
 * All charging MUST terminate if the overvoltage_limit_uv is ever reached.
 * Overcharging Lithium Ion cells can be DANGEROUS and lead to fire or
 * explosions.
 *
 * DETERMINING BATTERY CAPACITY:
 *
 * Several members of the struct deal with trying to determine the remaining
 * capacity in the battery, usually as a percentage of charge. In practice
 * many chargers uses a so-called fuel gauge or coloumb counter that measure
 * how much charge goes into the battery and how much goes out (+/- leak
 * consumption). This does not help if we do not know how much capacity the
 * battery has to begin with, such as when it is first used or was taken out
 * and charged in a separate charger. Therefore many capacity algorithms use
 * the open circuit voltage with a look-up table to determine the rough
 * capacity of the battery. The open circuit voltage can be conceptualized
 * with an ideal voltage source (V) in series with an internal resistance (Ri)
 * like this:
 *
 *      +-------> IBAT >----------------+
 *      |                    ^          |
 *     [ ] Ri                |          |
 *      |                    | VBAT     |
 *      o <----------        |          |
 *     +|           ^        |         [ ] Rload
 *    .---.         |        |          |
 *    | V |         | OCV    |          |
 *    '---'         |        |          |
 *      |           |        |          |
 *  GND +-------------------------------+
 *
 * If we disconnect the load (here simplified as a fixed resistance Rload)
 * and measure VBAT with a infinite impedance voltage meter we will get
 * VBAT = OCV and this assumption is sometimes made even under load, assuming
 * Rload is insignificant. However this will be of dubious quality because the
 * load is rarely that small and Ri is strongly nonlinear depending on
 * temperature and how much capacity is left in the battery due to the
 * chemistry involved.
 *
 * In many practical applications we cannot just disconnect the battery from
 * the load, so instead we often try to measure the instantaneous IBAT (the
 * current out from the battery), estimate the Ri and thus calculate the
 * voltage drop over Ri and compensate like this:
 *
 *   OCV = VBAT - (IBAT * Ri)
 *
 * The tables vbat2ri_discharging and vbat2ri_charging are used to determine
 * (by interpolation) the Ri from the VBAT under load. These curves are highly
 * nonlinear and may need many datapoints but can be found in datasheets for
 * some batteries. This gives the compensated open circuit voltage (OCV) for
 * the battery even under load. Using this method will also compensate for
 * temperature changes in the environment: this will also make the internal
 * resistance change, and it will affect the VBAT under load, so correlating
 * VBAT to Ri takes both remaining capacity and temperature into consideration.
 *
 * Alternatively a manufacturer can specify how the capacity of the battery
 * is dependent on the battery temperature which is the main factor affecting
 * Ri. As we know all checmical reactions are faster when it is warm and slower
 * when it is cold. You can put in 1500mAh and only get 800mAh out before the
 * voltage drops too low for example. This effect is also highly nonlinear and
 * the purpose of the table resist_table: this will take a temperature and
 * tell us how big percentage of Ri the specified temperature correlates to.
 * Usually we have 100% of the factory_internal_resistance_uohm at 25 degrees
 * Celsius.
 *
 * The power supply class itself doesn't use this struct as of now.
 */

struct power_supply_battery_info {
	unsigned int technology;
	int energy_full_design_uwh;
	int charge_full_design_uah;
	int voltage_min_design_uv;
	int voltage_max_design_uv;
	int tricklecharge_current_ua;
	int precharge_current_ua;
	int precharge_voltage_max_uv;
	int charge_term_current_ua;
	int charge_restart_voltage_uv;
	int overvoltage_limit_uv;
	int constant_charge_current_max_ua;
	int constant_charge_voltage_max_uv;
	struct power_supply_maintenance_charge_table *maintenance_charge;
	int maintenance_charge_size;
	int alert_low_temp_charge_current_ua;
	int alert_low_temp_charge_voltage_uv;
	int alert_high_temp_charge_current_ua;
	int alert_high_temp_charge_voltage_uv;
	int factory_internal_resistance_uohm;
	int factory_internal_resistance_charging_uohm;
	int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX];
	int temp_ambient_alert_min;
	int temp_ambient_alert_max;
	int temp_alert_min;
	int temp_alert_max;
	int temp_min;
	int temp_max;
	struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX];
	int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX];
	struct power_supply_resistance_temp_table *resist_table;
	int resist_table_size;
	struct power_supply_vbat_ri_table *vbat2ri_discharging;
	int vbat2ri_discharging_size;
	struct power_supply_vbat_ri_table *vbat2ri_charging;
	int vbat2ri_charging_size;
	int bti_resistance_ohm;
	int bti_resistance_tolerance;
};

extern struct atomic_notifier_head power_supply_notifier;
extern int power_supply_reg_notifier(struct notifier_block *nb);
extern void power_supply_unreg_notifier(struct notifier_block *nb);
#if IS_ENABLED(CONFIG_POWER_SUPPLY)
extern struct power_supply *power_supply_get_by_name(const char *name);
extern void power_supply_put(struct power_supply *psy);
#else
static inline void power_supply_put(struct power_supply *psy) {}
static inline struct power_supply *power_supply_get_by_name(const char *name)
{ return NULL; }
#endif
#ifdef CONFIG_OF
extern struct power_supply *power_supply_get_by_phandle(struct device_node *np,
							const char *property);
extern struct power_supply *devm_power_supply_get_by_phandle(
				    struct device *dev, const char *property);
#else /* !CONFIG_OF */
static inline struct power_supply *
power_supply_get_by_phandle(struct device_node *np, const char *property)
{ return NULL; }
static inline struct power_supply *
devm_power_supply_get_by_phandle(struct device *dev, const char *property)
{ return NULL; }
#endif /* CONFIG_OF */

extern const enum power_supply_property power_supply_battery_info_properties[];
extern const size_t power_supply_battery_info_properties_size;
extern int power_supply_get_battery_info(struct power_supply *psy,
					 struct power_supply_battery_info **info_out);
extern void power_supply_put_battery_info(struct power_supply *psy,
					  struct power_supply_battery_info *info);
extern bool power_supply_battery_info_has_prop(struct power_supply_battery_info *info,
					       enum power_supply_property psp);
extern int power_supply_battery_info_get_prop(struct power_supply_battery_info *info,
					      enum power_supply_property psp,
					      union power_supply_propval *val);
extern int power_supply_ocv2cap_simple(struct power_supply_battery_ocv_table *table,
				       int table_len, int ocv);
extern struct power_supply_battery_ocv_table *
power_supply_find_ocv2cap_table(struct power_supply_battery_info *info,
				int temp, int *table_len);
extern int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info,
					int ocv, int temp);
extern int
power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table,
				int table_len, int temp);
extern int power_supply_vbat2ri(struct power_supply_battery_info *info,
				int vbat_uv, bool charging);
extern struct power_supply_maintenance_charge_table *
power_supply_get_maintenance_charging_setting(struct power_supply_battery_info *info, int index);
extern bool power_supply_battery_bti_in_range(struct power_supply_battery_info *info,
					      int resistance);
extern void power_supply_changed(struct power_supply *psy);
extern int power_supply_am_i_supplied(struct power_supply *psy);
int power_supply_get_property_from_supplier(struct power_supply *psy,
					    enum power_supply_property psp,
					    union power_supply_propval *val);
extern int power_supply_set_battery_charged(struct power_supply *psy);

static inline bool
power_supply_supports_maintenance_charging(struct power_supply_battery_info *info)
{
	struct power_supply_maintenance_charge_table *mt;

mt = power_supply_get_maintenance_charging_setting(info, 0);

return (mt != NULL);
}

static inline bool
power_supply_supports_vbat2ri(struct power_supply_battery_info *info)
{
	return ((info->vbat2ri_discharging != NULL) &&
		info->vbat2ri_discharging_size > 0);
}

static inline bool
power_supply_supports_temp2ri(struct power_supply_battery_info *info)
{
	return ((info->resist_table != NULL) &&
		info->resist_table_size > 0);
}

#ifdef CONFIG_POWER_SUPPLY
extern int power_supply_is_system_supplied(void);
#else
static inline int power_supply_is_system_supplied(void) { return -ENOSYS; }
#endif

extern int power_supply_get_property(struct power_supply *psy,
			    enum power_supply_property psp,
			    union power_supply_propval *val);
#if IS_ENABLED(CONFIG_POWER_SUPPLY)
extern int power_supply_set_property(struct power_supply *psy,
			    enum power_supply_property psp,
			    const union power_supply_propval *val);
#else
static inline int power_supply_set_property(struct power_supply *psy,
			    enum power_supply_property psp,
			    const union power_supply_propval *val)
{ return 0; }
#endif
extern int power_supply_property_is_writeable(struct power_supply *psy,
					enum power_supply_property psp);
extern void power_supply_external_power_changed(struct power_supply *psy);

extern struct power_supply *__must_check
power_supply_register(struct device *parent,
				 const struct power_supply_desc *desc,
				 const struct power_supply_config *cfg);
extern struct power_supply *__must_check
power_supply_register_no_ws(struct device *parent,
				 const struct power_supply_desc *desc,
				 const struct power_supply_config *cfg);
extern struct power_supply *__must_check
devm_power_supply_register(struct device *parent,
				 const struct power_supply_desc *desc,
				 const struct power_supply_config *cfg);
extern struct power_supply *__must_check
devm_power_supply_register_no_ws(struct device *parent,
				 const struct power_supply_desc *desc,
				 const struct power_supply_config *cfg);
extern void power_supply_unregister(struct power_supply *psy);
extern int power_supply_powers(struct power_supply *psy, struct device *dev);

#define to_power_supply(device) container_of(device, struct power_supply, dev)

extern void *power_supply_get_drvdata(struct power_supply *psy);
/* For APM emulation, think legacy userspace. */
extern struct class *power_supply_class;

static inline bool power_supply_is_amp_property(enum power_supply_property psp)
{
	switch (psp) {
	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
	case POWER_SUPPLY_PROP_CHARGE_FULL:
	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
	case POWER_SUPPLY_PROP_CHARGE_NOW:
	case POWER_SUPPLY_PROP_CHARGE_AVG:
	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
	case POWER_SUPPLY_PROP_CURRENT_MAX:
	case POWER_SUPPLY_PROP_CURRENT_NOW:
	case POWER_SUPPLY_PROP_CURRENT_AVG:
	case POWER_SUPPLY_PROP_CURRENT_BOOT:
		return true;
	default:
		break;
	}

return false;
}

static inline bool power_supply_is_watt_property(enum power_supply_property psp)
{
	switch (psp) {
	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
	case POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN:
	case POWER_SUPPLY_PROP_ENERGY_FULL:
	case POWER_SUPPLY_PROP_ENERGY_EMPTY:
	case POWER_SUPPLY_PROP_ENERGY_NOW:
	case POWER_SUPPLY_PROP_ENERGY_AVG:
	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
	case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
	case POWER_SUPPLY_PROP_POWER_NOW:
		return true;
	default:
		break;
	}

return false;
}

#ifdef CONFIG_POWER_SUPPLY_HWMON
int power_supply_add_hwmon_sysfs(struct power_supply *psy);
void power_supply_remove_hwmon_sysfs(struct power_supply *psy);
#else
static inline int power_supply_add_hwmon_sysfs(struct power_supply *psy)
{
	return 0;
}

static inline
void power_supply_remove_hwmon_sysfs(struct power_supply *psy) {}
#endif

#ifdef CONFIG_SYSFS
ssize_t power_supply_charge_behaviour_show(struct device *dev,
					   unsigned int available_behaviours,
					   enum power_supply_charge_behaviour behaviour,
					   char *buf);

int power_supply_charge_behaviour_parse(unsigned int available_behaviours, const char *buf);
#else
static inline
ssize_t power_supply_charge_behaviour_show(struct device *dev,
					   unsigned int available_behaviours,
					   enum power_supply_charge_behaviour behaviour,
					   char *buf)
{
	return -EOPNOTSUPP;
}

static inline int power_supply_charge_behaviour_parse(unsigned int available_behaviours,
						      const char *buf)
{
	return -EOPNOTSUPP;
}
#endif

#endif /* __LINUX_POWER_SUPPLY_H__ */

[+] ..
[-] node.h [edit]
[-] via.h [edit]
[-] ks0108.h [edit]
[-] vfio.h [edit]
[-] rbtree.h [edit]
[-] stacktrace.h [edit]
[-] list.h [edit]
[-] mroute.h [edit]
[-] psp.h [edit]
[-] evm.h [edit]
[-] interconnect.h [edit]
[-] context_tracking_irq.h [edit]
[-] phy_fixed.h [edit]
[-] typecheck.h [edit]
[-] rio_ids.h [edit]
[-] sem.h [edit]
[-] instrumented.h [edit]
[-] count_zeros.h [edit]
[-] fs.h [edit]
[-] keyctl.h [edit]
[-] rtc.h [edit]
[-] mmu_context.h [edit]
[+] dsa
[-] virtio_caif.h [edit]
[-] atalk.h [edit]
[-] rndis.h [edit]
[-] virtio_anchor.h [edit]
[-] posix_acl.h [edit]
[-] rhashtable-types.h [edit]
[-] swap.h [edit]
[-] purgatory.h [edit]
[-] rtsx_pci.h [edit]
[-] aio.h [edit]
[-] rv.h [edit]
[-] nvme-auth.h [edit]
[-] args.h [edit]
[-] license.h [edit]
[-] bpfilter.h [edit]
[-] tty_flip.h [edit]
[-] crash_reserve.h [edit]
[-] compiler_attributes.h [edit]
[-] omap-dma.h [edit]
[-] range.h [edit]
[-] dfl.h [edit]
[-] if_ltalk.h [edit]
[-] attribute_container.h [edit]
[-] gfp_types.h [edit]
[-] hashtable_api.h [edit]
[-] dynamic_debug.h [edit]
[-] a.out.h [edit]
[-] cpuset.h [edit]
[-] ftrace.h [edit]
[-] export-internal.h [edit]
[-] vmalloc.h [edit]
[-] nd.h [edit]
[-] gfp.h [edit]
[-] kdb.h [edit]
[-] namei.h [edit]
[-] lockref.h [edit]
[-] in6.h [edit]
[-] skbuff.h [edit]
[-] ti-emif-sram.h [edit]
[-] logic_iomem.h [edit]
[-] phy_led_triggers.h [edit]
[-] trace_events.h [edit]
[-] radix-tree.h [edit]
[-] mount.h [edit]
[-] font.h [edit]
[-] tc.h [edit]
[-] dirent.h [edit]
[-] io-64-nonatomic-lo-hi.h [edit]
[-] crc7.h [edit]
[-] pstore_ram.h [edit]
[-] stmp_device.h [edit]
[-] mm_api.h [edit]
[-] mdev.h [edit]
[-] percpu.h [edit]
[-] once.h [edit]
[-] mdio-gpio.h [edit]
[-] ktime.h [edit]
[-] ata_platform.h [edit]
[-] tnum.h [edit]
[-] verification.h [edit]
[-] regmap.h [edit]
[-] lsm_count.h [edit]
[-] eventpoll.h [edit]
[-] cgroup_subsys.h [edit]
[-] arm-smccc.h [edit]
[-] debugobjects.h [edit]
[-] leds-regulator.h [edit]
[-] printk.h [edit]
[-] i2c-algo-pcf.h [edit]
[-] signal_types.h [edit]
[-] page-flags.h [edit]
[-] rpmsg.h [edit]
[-] wait.h [edit]
[-] blk-integrity.h [edit]
[-] bug.h [edit]
[-] ppp_channel.h [edit]
[-] kstrtox.h [edit]
[-] prefetch.h [edit]
[-] adxl.h [edit]
[-] serial_8250.h [edit]
[-] mnt_idmapping.h [edit]
[-] kgdb.h [edit]
[-] hdlcdrv.h [edit]
[-] bcm47xx_wdt.h [edit]
[-] irqhandler.h [edit]
[-] fwnode.h [edit]
[-] mc6821.h [edit]
[-] fwnode_mdio.h [edit]
[-] buildid.h [edit]
[-] amd-pmf-io.h [edit]
[+] irqchip
[-] netdevice.h [edit]
[-] root_dev.h [edit]
[-] leds-lp3952.h [edit]
[-] f75375s.h [edit]
[-] nl802154.h [edit]
[-] if_vlan.h [edit]
[-] list_bl.h [edit]
[-] elfnote-lto.h [edit]
[-] mdio-mux.h [edit]
[-] dma-fence-chain.h [edit]
[-] workqueue.h [edit]
[-] delayacct.h [edit]
[-] spinlock_types.h [edit]
[-] smp_types.h [edit]
[-] interval_tree.h [edit]
[-] oom.h [edit]
[-] phy_link_topology.h [edit]
[-] sysfb.h [edit]
[-] crc32.h [edit]
[-] mbus.h [edit]
[-] indirect_call_wrapper.h [edit]
[-] netfilter_bridge.h [edit]
[-] percpu-refcount.h [edit]
[-] cookie.h [edit]
[-] flex_proportions.h [edit]
[-] sonet.h [edit]
[-] entry-kvm.h [edit]
[-] migrate.h [edit]
[-] leds-ti-lmu-common.h [edit]
[-] map_benchmark.h [edit]
[-] kthread.h [edit]
[-] t10-pi.h [edit]
[-] dlm_plock.h [edit]
[-] vdpa.h [edit]
[-] spmi.h [edit]
[-] joystick.h [edit]
[-] rodata_test.h [edit]
[-] i2c-dev.h [edit]
[-] irq.h [edit]
[-] dma-mapping.h [edit]
[-] inet_diag.h [edit]
[-] blk-crypto.h [edit]
[-] fileattr.h [edit]
[-] stmmac.h [edit]
[-] pci-epf.h [edit]
[-] seqlock_types.h [edit]
[-] entry-common.h [edit]
[-] hwmon-sysfs.h [edit]
[-] moxtet.h [edit]
[-] ppp-comp.h [edit]
[-] cordic.h [edit]
[-] eisa.h [edit]
[-] reset.h [edit]
[-] pcs-lynx.h [edit]
[+] netfilter
[-] mxm-wmi.h [edit]
[-] generic-radix-tree.h [edit]
[-] llist.h [edit]
[-] dma-buf.h [edit]
[-] bitfield.h [edit]
[-] vt_kern.h [edit]
[-] consolemap.h [edit]
[-] module_symbol.h [edit]
[-] jbd2.h [edit]
[-] bit_spinlock.h [edit]
[-] dasd_mod.h [edit]
[-] ipmi_smi.h [edit]
[-] seqno-fence.h [edit]
[-] rcupdate.h [edit]
[-] netpoll.h [edit]
[-] llist_api.h [edit]
[-] badblocks.h [edit]
[-] libps2.h [edit]
[-] visorbus.h [edit]
[-] swap_slots.h [edit]
[-] rtnetlink.h [edit]
[-] mm_inline.h [edit]
[-] trace.h [edit]
[-] xarray.h [edit]
[-] seq_file.h [edit]
[-] hugetlb_inline.h [edit]
[-] pid.h [edit]
[-] libfdt.h [edit]
[-] wait_api.h [edit]
[-] siox.h [edit]
[-] omap-mailbox.h [edit]
[-] uuid.h [edit]
[-] parman.h [edit]
[-] nfs_page.h [edit]
[-] util_macros.h [edit]
[-] psp-platform-access.h [edit]
[-] rcutree.h [edit]
[-] mailbox_controller.h [edit]
[-] cgroup_rdma.h [edit]
[-] static_call_types.h [edit]
[-] memfd.h [edit]
[-] lz4.h [edit]
[-] omapfb.h [edit]
[-] base64.h [edit]
[-] termios_internal.h [edit]
[-] led-class-multicolor.h [edit]
[-] hwspinlock.h [edit]
[-] cfi.h [edit]
[-] seq_file_net.h [edit]
[-] misc_cgroup.h [edit]
[-] string_helpers.h [edit]
[-] sxgbe_platform.h [edit]
[-] clockchips.h [edit]
[-] tty_buffer.h [edit]
[-] tca6416_keypad.h [edit]
[-] brcmphy.h [edit]
[-] scs.h [edit]
[-] sock_diag.h [edit]
[-] freezer.h [edit]
[-] netfilter.h [edit]
[-] zconf.h [edit]
[-] stackdepot.h [edit]
[-] build-salt.h [edit]
[-] seg6.h [edit]
[-] cm4000_cs.h [edit]
[-] gameport.h [edit]
[-] tpm_svsm.h [edit]
[-] hpet.h [edit]
[-] pata_arasan_cf_data.h [edit]
[-] restart_block.h [edit]
[-] nfs_fs.h [edit]
[-] of_fdt.h [edit]
[-] mem_encrypt.h [edit]
[-] dpll.h [edit]
[-] proc_fs.h [edit]
[-] ahci-remap.h [edit]
[-] topology.h [edit]
[-] ssbi.h [edit]
[-] randomize_kstack.h [edit]
[-] configfs.h [edit]
[-] iscsi_boot_sysfs.h [edit]
[-] netfs.h [edit]
[-] security.h [edit]
[-] bpf_lsm.h [edit]
[-] spinlock_rt.h [edit]
[+] soundwire
[-] acpi_viot.h [edit]
[-] cn_proc.h [edit]
[-] genl_magic_struct.h [edit]
[-] thermal.h [edit]
[-] scatterlist.h [edit]
[-] ahci_platform.h [edit]
[-] dma-resv.h [edit]
[-] spinlock_api_up.h [edit]
[-] backing-dev-defs.h [edit]
[-] hash.h [edit]
[-] pvclock_gtod.h [edit]
[-] kconfig.h [edit]
[+] mmc
[-] uidgid.h [edit]
[-] s3c_adc_battery.h [edit]
[-] cdrom.h [edit]
[-] parport_pc.h [edit]
[-] random.h [edit]
[-] fscache.h [edit]
[-] watch_queue.h [edit]
[-] tty_ldisc.h [edit]
[-] btree-128.h [edit]
[-] mm_types.h [edit]
[-] pwm_backlight.h [edit]
[-] usbdevice_fs.h [edit]
[-] libfdt_env.h [edit]
[-] firmware.h [edit]
[-] miscdevice.h [edit]
[-] kmsan_string.h [edit]
[-] threads.h [edit]
[-] mpi.h [edit]
[-] ip.h [edit]
[-] kbd_diacr.h [edit]
[+] regulator
[-] jz4740-adc.h [edit]
[-] bma150.h [edit]
[-] bio.h [edit]
[-] bpf_lirc.h [edit]
[-] nvme-fc-driver.h [edit]
[-] rmi.h [edit]
[-] ds2782_battery.h [edit]
[-] mhi_ep.h [edit]
[-] tick.h [edit]
[-] isa.h [edit]
[-] srcutiny.h [edit]
[-] cnt32_to_63.h [edit]
[-] extcon.h [edit]
[-] intel_vsec.h [edit]
[-] etherdevice.h [edit]
[-] apple_bl.h [edit]
[-] of_platform.h [edit]
[-] iommu-dma.h [edit]
[+] pse-pd
[-] dm-verity-loadpin.h [edit]
[-] nfs_fs_sb.h [edit]
[-] flat.h [edit]
[-] libnvdimm.h [edit]
[-] fsl_devices.h [edit]
[-] scc.h [edit]
[-] olpc-ec.h [edit]
[+] avf
[-] auto_dev-ioctl.h [edit]
[-] ioprio.h [edit]
[-] compiler-gcc.h [edit]
[-] sh_clk.h [edit]
[-] spinlock_api.h [edit]
[-] init_task.h [edit]
[-] sys.h [edit]
[-] virtio_dma_buf.h [edit]
[-] once_lite.h [edit]
[-] ascii85.h [edit]
[-] lockdep_api.h [edit]
[-] dns_resolver.h [edit]
[-] transport_class.h [edit]
[-] if_pppol2tp.h [edit]
[-] devfreq_cooling.h [edit]
[-] pm.h [edit]
[-] mroute6.h [edit]
[-] kernel.h [edit]
[-] module.h [edit]
[-] scpi_protocol.h [edit]
[-] io-64-nonatomic-hi-lo.h [edit]
[-] counter.h [edit]
[-] dtlk.h [edit]
[-] devm-helpers.h [edit]
[-] rwlock_rt.h [edit]
[-] ratelimit_types.h [edit]
[-] kmsg_dump.h [edit]
[-] memcontrol.h [edit]
[-] pstore.h [edit]
[+] mlx5
[-] scx200.h [edit]
[-] rational.h [edit]
[-] fwctl.h [edit]
[-] filter.h [edit]
[+] remoteproc
[-] l2tp.h [edit]
[-] rio_drv.h [edit]
[-] lis3lv02d.h [edit]
[-] aer.h [edit]
[-] string_choices.h [edit]
[-] ata.h [edit]
[-] stdarg.h [edit]
[-] phylib_stubs.h [edit]
[-] pgtable_api.h [edit]
[-] local_lock_internal.h [edit]
[-] gcd.h [edit]
[-] stringhash.h [edit]
[-] icmpv6.h [edit]
[-] bpf_trace.h [edit]
[-] arm_sdei.h [edit]
[-] nvme-tcp.h [edit]
[-] min_heap.h [edit]
[-] drbd_genl_api.h [edit]
[-] stmp3xxx_rtc_wdt.h [edit]
[-] pm_domain.h [edit]
[-] prime_numbers.h [edit]
[-] if_fddi.h [edit]
[-] ucb1400.h [edit]
[-] mnt_namespace.h [edit]
[-] if_macvlan.h [edit]
[-] posix-clock.h [edit]
[-] isapnp.h [edit]
[-] pm_opp.h [edit]
[-] memory.h [edit]
[-] if_link.h [edit]
[-] vt.h [edit]
[-] libgcc.h [edit]
[-] tifm.h [edit]
[-] rcu_node_tree.h [edit]
[-] mISDNif.h [edit]
[-] tracepoint-defs.h [edit]
[-] wm97xx.h [edit]
[-] nfsacl.h [edit]
[-] exportfs.h [edit]
[-] skb_array.h [edit]
[-] i2c-mux.h [edit]
[-] filelock.h [edit]
[-] errqueue.h [edit]
[-] of_graph.h [edit]
[-] of_mdio.h [edit]
[-] nospec.h [edit]
[-] tracefs.h [edit]
[-] jiffies.h [edit]
[-] dca.h [edit]
[-] i2c-algo-pca.h [edit]
[-] igmp.h [edit]
[-] edd.h [edit]
[+] decompress
[-] isa-dma.h [edit]
[-] wwan.h [edit]
[-] numa.h [edit]
[-] spinlock_api_smp.h [edit]
[-] 8250_pci.h [edit]
[-] ipv6_route.h [edit]
[-] dma-map-ops.h [edit]
[-] minmax.h [edit]
[-] if_tunnel.h [edit]
[-] devcoredump.h [edit]
[-] via-core.h [edit]
[-] bootmem_info.h [edit]
[+] device
[-] kmsan-checks.h [edit]
[-] user.h [edit]
[-] most.h [edit]
[-] sony-laptop.h [edit]
[+] fsl
[+] mdio
[-] ww_mutex.h [edit]
[-] workqueue_api.h [edit]
[-] seq_buf.h [edit]
[+] isdn
[-] io_uring.h [edit]
[-] kmod.h [edit]
[-] rculist.h [edit]
[-] regset.h [edit]
[-] logic_pio.h [edit]
[-] mman.h [edit]
[-] memblock.h [edit]
[-] if_tun.h [edit]
[+] extcon
[-] dmi.h [edit]
[-] union_find.h [edit]
[-] page_idle.h [edit]
[-] page_reporting.h [edit]
[-] openvswitch.h [edit]
[-] if_eql.h [edit]
[-] cgroup.h [edit]
[-] atm_tcp.h [edit]
[-] pci-doe.h [edit]
[-] nls.h [edit]
[-] led-lm3530.h [edit]
[-] iversion.h [edit]
[-] kmemleak.h [edit]
[-] rhashtable.h [edit]
[-] tsacct_kern.h [edit]
[-] coresight-stm.h [edit]
[-] smscphy.h [edit]
[-] smc911x.h [edit]
[-] watchdog.h [edit]
[-] kcov.h [edit]
[-] dm-region-hash.h [edit]
[-] sysrq.h [edit]
[-] wmi.h [edit]
[-] clk.h [edit]
[-] bitmap.h [edit]
[-] smp.h [edit]
[-] hashtable.h [edit]
[-] adreno-smmu-priv.h [edit]
[-] videodev2.h [edit]
[-] taskstats_kern.h [edit]
[-] errname.h [edit]
[-] array_size.h [edit]
[-] objtool_types.h [edit]
[-] if_team.h [edit]
[+] io_uring
[-] device-mapper.h [edit]
[-] blk_types.h [edit]
[-] async.h [edit]
[-] audit.h [edit]
[-] blk-mq.h [edit]
[-] damon.h [edit]
[+] power
[-] vmw_vmci_defs.h [edit]
[-] acpi_pmtmr.h [edit]
[-] pldmfw.h [edit]
[-] journal-head.h [edit]
[-] swapops.h [edit]
[-] ipmi.h [edit]
[-] kref_api.h [edit]
[-] netfilter_ipv6.h [edit]
[-] nfs3.h [edit]
[-] padata.h [edit]
[-] cred.h [edit]
[-] syscalls.h [edit]
[-] srcu.h [edit]
[-] ntb_transport.h [edit]
[-] apm_bios.h [edit]
[-] efi.h [edit]
[-] elf.h [edit]
[-] ntb.h [edit]
[-] lsm_hooks.h [edit]
[-] altera_uart.h [edit]
[-] uio.h [edit]
[-] nubus.h [edit]
[-] jhash.h [edit]
[-] iommufd.h [edit]
[-] align.h [edit]
[-] fsnotify_backend.h [edit]
[-] screen_info.h [edit]
[-] devfreq.h [edit]
[-] synclink.h [edit]
[-] vmpressure.h [edit]
[-] spinlock_types_raw.h [edit]
[-] rcutiny.h [edit]
[-] kexec.h [edit]
[-] netlink.h [edit]
[-] xxhash.h [edit]
[-] unroll.h [edit]
[-] scmi_protocol.h [edit]
[-] srcutree.h [edit]
[-] stm.h [edit]
[-] utsname.h [edit]
[-] ring_buffer.h [edit]
[-] pm_wakeup.h [edit]
[-] initrd.h [edit]
[-] dma-direct.h [edit]
[-] micrel_phy.h [edit]
[-] latencytop.h [edit]
[-] phonet.h [edit]
[-] mv643xx_i2c.h [edit]
[-] packing.h [edit]
[-] lcd.h [edit]
[-] tpm.h [edit]
[-] dm-io.h [edit]
[-] dqblk_v2.h [edit]
[-] local_lock.h [edit]
[-] of_reserved_mem.h [edit]
[-] host1x_context_bus.h [edit]
[-] sdb.h [edit]
[-] path.h [edit]
[-] async_tx.h [edit]
[-] rslib.h [edit]
[-] limits.h [edit]
[-] shdma-base.h [edit]
[-] cb710.h [edit]
[-] hardirq.h [edit]
[-] fsi-sbefifo.h [edit]
[-] group_cpus.h [edit]
[-] hid-over-i2c.h [edit]
[-] nodemask.h [edit]
[-] of_address.h [edit]
[-] posix_acl_xattr.h [edit]
[-] atomic.h [edit]
[-] find.h [edit]
[-] mpls_iptunnel.h [edit]
[+] platform_data
[-] compaction.h [edit]
[-] eeprom_93cx6.h [edit]
[-] zorro.h [edit]
[-] timb_dma.h [edit]
[-] interval_tree_generic.h [edit]
[-] pda_power.h [edit]
[-] kobject_api.h [edit]
[-] lru_cache.h [edit]
[-] libata.h [edit]
[-] earlycpio.h [edit]
[-] debug_locks.h [edit]
[-] maple.h [edit]
[-] cpuidle.h [edit]
[-] fs_types.h [edit]
[+] firmware
[-] ksm.h [edit]
[-] backlight.h [edit]
[-] pagevec.h [edit]
[-] goldfish.h [edit]
[-] mpls.h [edit]
[-] connector.h [edit]
[-] instrumentation.h [edit]
[-] zswap.h [edit]
[-] fs_context.h [edit]
[-] gpio_keys.h [edit]
[-] qnx6_fs.h [edit]
[-] sunxi-rsb.h [edit]
[-] msg.h [edit]
[-] intel_rapl.h [edit]
[-] surface_acpi_notify.h [edit]
[-] bpf_mprog.h [edit]
[-] eeprom_93xx46.h [edit]
[-] khugepaged.h [edit]
[-] cuda.h [edit]
[-] hmm.h [edit]
[-] hil_mlc.h [edit]
[-] pm-trace.h [edit]
[-] intel_tpmi.h [edit]
[-] preempt.h [edit]
[-] zlib.h [edit]
[-] dma-fence-unwrap.h [edit]
[-] container_of.h [edit]
[-] ns_common.h [edit]
[-] pl320-ipc.h [edit]
[-] pti.h [edit]
[-] eventfd.h [edit]
[-] pkeys.h [edit]
[-] leds.h [edit]
[-] fd.h [edit]
[-] irqflags.h [edit]
[-] nvram.h [edit]
[-] trace_clock.h [edit]
[-] tboot.h [edit]
[-] unicode.h [edit]
[-] irqdomain_defs.h [edit]
[-] sched_clock.h [edit]
[-] seccomp.h [edit]
[-] quotaops.h [edit]
[-] cfi_types.h [edit]
[-] firmware-map.h [edit]
[-] vermagic.h [edit]
[-] uaccess.h [edit]
[-] sm501-regs.h [edit]
[-] hid-roccat.h [edit]
[-] list_sort.h [edit]
[-] linear_range.h [edit]
[-] sram.h [edit]
[+] mux
[-] elfnote.h [edit]
[-] anon_inodes.h [edit]
[-] fs_api.h [edit]
[-] page_ref.h [edit]
[-] tracehook.h [edit]
[+] atomic
[-] rmap.h [edit]
[-] mpage.h [edit]
[-] if_ether.h [edit]
[-] instruction_pointer.h [edit]
[-] davinci_emac.h [edit]
[-] pci_ids.h [edit]
[-] ethtool_netlink.h [edit]
[-] virtio_pci_legacy.h [edit]
[-] cleanup.h [edit]
[-] mii_timestamper.h [edit]
[-] dim.h [edit]
[-] efs_vh.h [edit]
[-] bio-integrity.h [edit]
[-] parser.h [edit]
[-] refcount_api.h [edit]
[-] vga_switcheroo.h [edit]
[-] reset-controller.h [edit]
[-] average.h [edit]
[-] pm_wakeirq.h [edit]
[-] crc8.h [edit]
[-] trace_seq.h [edit]
[-] of_dma.h [edit]
[-] fixp-arith.h [edit]
[-] bpf_verifier.h [edit]
[-] ptr_ring.h [edit]
[-] cma.h [edit]
[-] drbd_genl.h [edit]
[-] nvme-rdma.h [edit]
[-] ftrace_irq.h [edit]
[-] sh_timer.h [edit]
[-] pmu.h [edit]
[-] writeback.h [edit]
[-] i2c.h [edit]
[-] bits.h [edit]
[-] inetdevice.h [edit]
[-] mmzone.h [edit]
[-] bcd.h [edit]
[-] zstd_lib.h [edit]
[-] blk-crypto-profile.h [edit]
[-] fsi.h [edit]
[-] uacce.h [edit]
[-] elf-fdpic.h [edit]
[-] fsi-occ.h [edit]
[+] surface_aggregator
[-] yam.h [edit]
[-] set_memory.h [edit]
[-] timekeeping.h [edit]
[-] prmt.h [edit]
[-] dev_printk.h [edit]
[-] extcon-provider.h [edit]
[-] selection.h [edit]
[-] smsc911x.h [edit]
[-] uts.h [edit]
[+] spi
[-] pxa168_eth.h [edit]
[-] aperture.h [edit]
[-] leds-lp3944.h [edit]
[-] serial_s3c.h [edit]
[-] mv643xx_eth.h [edit]
[-] ihex.h [edit]
[-] hugetlb.h [edit]
[-] toshiba.h [edit]
[-] lsm_audit.h [edit]
[-] virtio_byteorder.h [edit]
[-] console_struct.h [edit]
[-] if_bridge.h [edit]
[-] bitrev.h [edit]
[-] vm_event_item.h [edit]
[-] statfs.h [edit]
[-] clocksource.h [edit]
[-] parport.h [edit]
[-] fscrypt.h [edit]
[-] cpuidle_haltpoll.h [edit]
[-] textsearch_fsm.h [edit]
[-] fcntl.h [edit]
[-] build_bug.h [edit]
[-] icmp.h [edit]
[-] swiotlb.h [edit]
[-] cciss_ioctl.h [edit]
[-] smpboot.h [edit]
[-] page_owner.h [edit]
[-] leds-pca9532.h [edit]
[-] zstd.h [edit]
[-] ptrace.h [edit]
[-] dlm.h [edit]
[-] umh.h [edit]
[-] glob.h [edit]
[-] swapfile.h [edit]
[-] blkdev.h [edit]
[-] crc64.h [edit]
[-] buffer_head.h [edit]
[-] input.h [edit]
[-] sys_soc.h [edit]
[-] adb.h [edit]
[-] atmel-ssc.h [edit]
[-] efi-bgrt.h [edit]
[-] greybus.h [edit]
[-] lockdep.h [edit]
[-] syslog.h [edit]
[-] altera_jtaguart.h [edit]
[-] stackprotector.h [edit]
[-] err.h [edit]
[-] powercap.h [edit]
[-] virtio_console.h [edit]
[-] psci.h [edit]
[-] ctype.h [edit]
[-] pktcdvd.h [edit]
[-] usb.h [edit]
[-] cache.h [edit]
[-] stringify.h [edit]
[-] virtio_config.h [edit]
[-] bcm47xx_nvram.h [edit]
[-] socket.h [edit]
[-] adfs_fs.h [edit]
[-] stat.h [edit]
[-] hidraw.h [edit]
[-] mmdebug.h [edit]
[-] ethtool.h [edit]
[-] refcount.h [edit]
[-] console.h [edit]
[-] static_key.h [edit]
[-] sctp.h [edit]
[-] pnfs_osd_xdr.h [edit]
[-] irqnr.h [edit]
[-] slab.h [edit]
[-] fortify-string.h [edit]
[-] cfag12864b.h [edit]
[-] rwlock_types.h [edit]
[-] extable.h [edit]
[-] rcuwait_api.h [edit]
[-] interrupt.h [edit]
[-] irqbypass.h [edit]
[-] swap_cgroup.h [edit]
[-] irqchip.h [edit]
[-] kvm_para.h [edit]
[-] dm-dirty-log.h [edit]
[-] if_pppox.h [edit]
[-] iommu.h [edit]
[-] nvme.h [edit]
[-] lcm.h [edit]
[-] sprintf.h [edit]
[-] io-mapping.h [edit]
[-] uprobes.h [edit]
[-] module_signature.h [edit]
[-] component.h [edit]
[-] resource_ext.h [edit]
[-] rwlock.h [edit]
[-] clkdev.h [edit]
[-] serial_core.h [edit]
[-] gpio-pxa.h [edit]
[-] pr.h [edit]
[-] of_gpio.h [edit]
[-] pstore_blk.h [edit]
[-] pruss_driver.h [edit]
[-] soundcard.h [edit]
[-] coredump.h [edit]
[-] nvmem-provider.h [edit]
[-] asn1_encoder.h [edit]
[-] memregion.h [edit]
[-] zpool.h [edit]
[-] kfence.h [edit]
[-] int_log.h [edit]
[-] list_lru.h [edit]
[-] ecryptfs.h [edit]
[-] dqblk_qtree.h [edit]
[-] cpumask_api.h [edit]
[-] kmsan.h [edit]
[-] if_rmnet.h [edit]
[-] device.h [edit]
[-] digsig.h [edit]
[-] kernel-page-flags.h [edit]
[-] cacheflush.h [edit]
[-] acpi.h [edit]
[-] w1-gpio.h [edit]
[+] greybus
[-] auxiliary_bus.h [edit]
[-] userfaultfd_k.h [edit]
[-] sysctl.h [edit]
[-] bpf-cgroup.h [edit]
[-] gfp_api.h [edit]
[-] elfcore-compat.h [edit]
[-] pci-ats.h [edit]
[-] linkmode.h [edit]
[-] cpuhotplug.h [edit]
[-] bpf_mem_alloc.h [edit]
[-] page-flags-layout.h [edit]
[-] dynamic_queue_limits.h [edit]
[-] ptp_classify.h [edit]
[-] i8253.h [edit]
[-] lapb.h [edit]
[-] led-class-flash.h [edit]
[-] dma-fence-array.h [edit]
[-] htcpld.h [edit]
[-] switchtec.h [edit]
[-] psi_types.h [edit]
[-] sh_dma.h [edit]
[-] msi.h [edit]
[-] fsl-diu-fb.h [edit]
[-] rethook.h [edit]
[-] perf_regs.h [edit]
[+] amba
[-] xattr.h [edit]
[-] acpi_mdio.h [edit]
[-] kvm_dirty_ring.h [edit]
[-] kref.h [edit]
[-] kmsan_types.h [edit]
[-] auto_fs.h [edit]
[-] bcm47xx_sprom.h [edit]
[-] signalfd.h [edit]
[-] kobj_map.h [edit]
[-] sync_file.h [edit]
[-] notifier.h [edit]
[-] ks8851_mll.h [edit]
[-] delayed_call.h [edit]
[-] tee_core.h [edit]
[-] swait.h [edit]
[-] projid.h [edit]
[-] pwm.h [edit]
[-] cgroup-defs.h [edit]
[-] bottom_half.h [edit]
[-] key.h [edit]
[-] virtio_net.h [edit]
[-] iopoll.h [edit]
[-] bcm963xx_tag.h [edit]
[-] kernel_stat.h [edit]
[-] cpu_cooling.h [edit]
[-] syscalls_api.h [edit]
[-] mempolicy.h [edit]
[-] fprobe.h [edit]
[-] linkage.h [edit]
[-] win_minmax.h [edit]
[-] balloon_compaction.h [edit]
[-] const.h [edit]
[-] vgaarb.h [edit]
[-] rwlock_api_smp.h [edit]
[-] ism.h [edit]
[+] rpmsg
[-] mm.h [edit]
[-] objtool.h [edit]
[-] timex.h [edit]
[-] timecounter.h [edit]
[-] time_namespace.h [edit]
[-] nsproxy.h [edit]
[-] iova_bitmap.h [edit]
[-] polynomial.h [edit]
[-] sm501.h [edit]
[-] kbuild.h [edit]
[-] key-type.h [edit]
[-] timer.h [edit]
[-] iova.h [edit]
[-] seg6_local.h [edit]
[-] vtime.h [edit]
[-] rbtree_augmented.h [edit]
[-] panic.h [edit]
[-] llc.h [edit]
[-] cpu_rmap.h [edit]
[-] amd-iommu.h [edit]
[-] phy.h [edit]
[-] fs_enet_pd.h [edit]
[+] iio
[-] wl12xx.h [edit]
[-] alcor_pci.h [edit]
[-] stop_machine.h [edit]
[-] hp_sdc.h [edit]
[-] lwq.h [edit]
[-] bpf.h [edit]
[-] pim.h [edit]
[-] vt_buffer.h [edit]
[-] raid_class.h [edit]
[-] shmem_fs.h [edit]
[+] netfilter_bridge
[-] types.h [edit]
[-] of_net.h [edit]
[+] mtd
[-] bpf_types.h [edit]
[-] siphash.h [edit]
[-] inotify.h [edit]
[-] fips.h [edit]
[-] devpts_fs.h [edit]
[-] ucs2_string.h [edit]
[-] pci-p2pdma.h [edit]
[-] panic_notifier.h [edit]
[-] uio_driver.h [edit]
[-] crc-ccitt.h [edit]
[-] zsmalloc.h [edit]
[-] pe.h [edit]
[-] sed-opal.h [edit]
[-] shrinker.h [edit]
[-] c2port.h [edit]
[-] poll.h [edit]
[-] genl_magic_func.h [edit]
[-] ratelimit.h [edit]
[-] pps_kernel.h [edit]
[-] textsearch.h [edit]
[-] ieee802154.h [edit]
[-] reciprocal_div.h [edit]
[-] trace_recursion.h [edit]
[-] mISDNhw.h [edit]
[-] reboot.h [edit]
[-] ccp.h [edit]
[-] btree-type.h [edit]
[-] btrfs.h [edit]
[-] posix-timers.h [edit]
[-] fault-inject-usercopy.h [edit]
[-] kasan.h [edit]
[-] if_arp.h [edit]
[-] sort.h [edit]
[-] gpio.h [edit]
[-] fs_stack.h [edit]
[-] dm-kcopyd.h [edit]
[-] crash_dump.h [edit]
[-] start_kernel.h [edit]
[-] sonypi.h [edit]
[-] spinlock_types_up.h [edit]
[-] cdev.h [edit]
[-] w1.h [edit]
[-] slimbus.h [edit]
[-] pci-acpi.h [edit]
[-] percpu-defs.h [edit]
[-] workqueue_types.h [edit]
[-] assoc_array.h [edit]
[-] usb_usual.h [edit]
[-] linux_logo.h [edit]
[-] z2_battery.h [edit]
[-] math.h [edit]
[-] agp_backend.h [edit]
[-] kdev_t.h [edit]
[-] user-return-notifier.h [edit]
[-] slab_def.h [edit]
[-] quota.h [edit]
[-] of_irq.h [edit]
[-] dmaengine.h [edit]
[-] mdio.h [edit]
[+] sunrpc
[-] errno.h [edit]
[-] fec.h [edit]
[-] drbd_config.h [edit]
[-] kernel_read_file.h [edit]
[-] u64_stats_sync_api.h [edit]
[+] pinctrl
[-] kfifo.h [edit]
[-] capability.h [edit]
[-] bpf-cgroup-defs.h [edit]
[-] highmem.h [edit]
[-] mutex.h [edit]
[-] ipack.h [edit]
[-] timer_types.h [edit]
[-] rcu_segcblist.h [edit]
[-] seqlock.h [edit]
[-] bch.h [edit]
[-] hil.h [edit]
[-] ptp_clock_kernel.h [edit]
[-] arm_ffa.h [edit]
[+] mlx4
[-] hyperv.h [edit]
[-] kasan-checks.h [edit]
[-] plist.h [edit]
[-] pipe_fs_i.h [edit]
[-] firewire.h [edit]
[-] ima.h [edit]
[-] if_tap.h [edit]
[-] coresight.h [edit]
[-] sed-opal-key.h [edit]
[-] property.h [edit]
[-] net_tstamp.h [edit]
[+] soc
[-] nfs_ssc.h [edit]
[-] nvme-keyring.h [edit]
[-] hid.h [edit]
[-] netfilter_ipv4.h [edit]
[-] stddef.h [edit]
[-] hid-sensor-ids.h [edit]
[-] intel-ish-client-if.h [edit]
[-] kobject.h [edit]
[-] psi.h [edit]
[-] cpu_smt.h [edit]
[-] iosys-map.h [edit]
[-] ext2_fs.h [edit]
[-] acpi_dma.h [edit]
[-] btf_ids.h [edit]
[-] mvebu-pmsu.h [edit]
[-] dma-fence.h [edit]
[-] of_iommu.h [edit]
[-] kvm_types.h [edit]
[-] fb.h [edit]
[-] coresight-pmu.h [edit]
[-] svga.h [edit]
[-] mei_aux.h [edit]
[+] reset
[-] swait_api.h [edit]
[-] vme.h [edit]
[-] remoteproc.h [edit]
[-] pstore_zone.h [edit]
[-] cpu.h [edit]
[-] i8042.h [edit]
[-] vmw_vmci_api.h [edit]
[-] atmel_pdc.h [edit]
[-] platform_profile.h [edit]
[-] asn1_ber_bytecode.h [edit]
[-] nmi.h [edit]
[-] rcupdate_wait.h [edit]
[+] qat
[-] fw_table.h [edit]
[-] seg6_genl.h [edit]
[-] device_cgroup.h [edit]
[-] tty_port.h [edit]
[-] tcp.h [edit]
[-] irqdesc.h [edit]
[-] edac.h [edit]
[-] coda.h [edit]
[-] fsnotify.h [edit]
[-] pci.h [edit]
[-] seqlock_api.h [edit]
[-] timerqueue.h [edit]
[-] mmu_notifier.h [edit]
[-] msdos_fs.h [edit]
[+] qed
[-] virtio.h [edit]
[-] pmbus.h [edit]
[-] percpu_counter.h [edit]
[-] hid_bpf.h [edit]
[-] dmapool.h [edit]
[-] time64.h [edit]
[-] sbitmap.h [edit]
[-] fbcon.h [edit]
[-] pci-dma-compat.h [edit]
[-] iscsi_ibft.h [edit]
[-] pfn_t.h [edit]
[-] serial_bcm63xx.h [edit]
[-] context_tracking_state.h [edit]
[-] cpuhplock.h [edit]
[-] seg6_iptunnel.h [edit]
[-] xz.h [edit]
[-] fscache-cache.h [edit]
[-] apple-gmux.h [edit]
[-] efi_embedded_fw.h [edit]
[-] io-pgtable.h [edit]
[-] nfs_iostat.h [edit]
[-] timerfd.h [edit]
[-] hwmon-vid.h [edit]
[-] hid-sensor-hub.h [edit]
[-] zutil.h [edit]
[-] jump_label.h [edit]
[-] atm.h [edit]
[-] sync_core.h [edit]
[-] rculist_bl.h [edit]
[-] ipv6.h [edit]
[-] hrtimer.h [edit]
[-] syscall_user_dispatch.h [edit]
[-] sunserialcore.h [edit]
[+] clk
[-] blk-cgroup.h [edit]
[-] atmel-isc-media.h [edit]
[-] msdos_partition.h [edit]
[-] skmsg.h [edit]
[-] devfreq-event.h [edit]
[-] ti_wilink_st.h [edit]
[-] lockdep_types.h [edit]
[-] usermode_driver.h [edit]
[-] tpm_eventlog.h [edit]
[-] hdmi.h [edit]
[-] futex.h [edit]
[-] pfn.h [edit]
[-] ras.h [edit]
[-] crc16.h [edit]
[-] kernfs.h [edit]
[-] serial.h [edit]
[-] hippidevice.h [edit]
[-] lp.h [edit]
[-] ptp_mock.h [edit]
[-] bsg.h [edit]
[-] processor.h [edit]
[-] apm-emulation.h [edit]
[+] mailbox
[-] armada-37xx-rwtm-mailbox.h [edit]
[-] patchkey.h [edit]
[-] freelist.h [edit]
[-] serdev.h [edit]
[-] mmap_lock.h [edit]
[-] spinlock.h [edit]
[-] fault-inject.h [edit]
[-] msi_api.h [edit]
[-] sound.h [edit]
[-] vhost_iotlb.h [edit]
[-] proc_ns.h [edit]
[-] crc-itu-t.h [edit]
[-] delay.h [edit]
[-] shm.h [edit]
[+] mfd
[-] power_supply.h [edit]
[-] platform_device.h [edit]
[-] rtmutex.h [edit]
[-] ipc.h [edit]
[-] mv643xx.h [edit]
[-] maple_tree.h [edit]
[-] page_table_check.h [edit]
[-] cacheinfo.h [edit]
[-] rfkill.h [edit]
[-] rcuref.h [edit]
[-] cpufeature.h [edit]
[-] mmiotrace.h [edit]
[-] semaphore.h [edit]
[-] wkup_m3_ipc.h [edit]
[-] pagemap.h [edit]
[-] mailbox_client.h [edit]
[-] sw842.h [edit]
[-] sockptr.h [edit]
[-] dma-heap.h [edit]
[-] leds-bd2802.h [edit]
[-] intel_th.h [edit]
[-] auxvec.h [edit]
[-] imx-media.h [edit]
[-] thread_info.h [edit]
[-] serial_max3100.h [edit]
[-] mroute_base.h [edit]
[-] cgroup_api.h [edit]
[-] vfio_pci_core.h [edit]
[-] hte.h [edit]
[+] can
[-] i2c-smbus.h [edit]
[-] jump_label_ratelimit.h [edit]
[-] energy_model.h [edit]
[-] pm_runtime.h [edit]
[-] static_call.h [edit]
[-] genalloc.h [edit]
[-] fddidevice.h [edit]
[-] fsldma.h [edit]
[-] poison.h [edit]
[+] sched
[-] fs_struct.h [edit]
[-] hw_random.h [edit]
[-] getcpu.h [edit]
[-] hw_breakpoint.h [edit]
[-] zstd_errors.h [edit]
[-] fsverity.h [edit]
[-] dax.h [edit]
[-] in.h [edit]
[-] if_phonet.h [edit]
[-] livepatch.h [edit]
[-] keyboard.h [edit]
[-] drbd_limits.h [edit]
[-] virtio_ring.h [edit]
[-] nfs_fs_i.h [edit]
[-] crc32poly.h [edit]
[-] udp.h [edit]
[-] signal.h [edit]
[-] iocontext.h [edit]
[-] nitro_enclaves.h [edit]
[+] phy
[-] lantiq.h [edit]
[-] compiler.h [edit]
[+] ssb
[-] osq_lock.h [edit]
[-] hrtimer_defs.h [edit]
[-] pci-ep-cfs.h [edit]
[-] irqreturn.h [edit]
[-] blockgroup_lock.h [edit]
[-] wireless.h [edit]
[-] vfs.h [edit]
[-] init.h [edit]
[-] pci-tph.h [edit]
[-] dm-bufio.h [edit]
[-] irq_work.h [edit]
[-] i2c-algo-bit.h [edit]
[-] sungem_phy.h [edit]
[-] mISDNdsp.h [edit]
[-] hid-debug.h [edit]
[-] cs5535.h [edit]
[-] of.h [edit]
[-] dma-direction.h [edit]
[-] rculist_nulls.h [edit]
[+] i3c
[-] tegra-icc.h [edit]
[-] error-injection.h [edit]
[-] clocksource_ids.h [edit]
[+] pcs
[-] file.h [edit]
[-] overflow.h [edit]
[-] wait_bit.h [edit]
[+] rtc
[-] timb_gpio.h [edit]
[-] sh_intc.h [edit]
[-] sysv_fs.h [edit]
[-] task_io_accounting_ops.h [edit]
[-] kbd_kern.h [edit]
[-] netdev_features.h [edit]
[-] dtpm.h [edit]
[-] cper.h [edit]
[-] if_hsr.h [edit]
[-] rtsx_usb.h [edit]
[-] irqdomain.h [edit]
[-] string.h [edit]
[-] rwbase_rt.h [edit]
[-] percpu-rwsem.h [edit]
[-] context_tracking.h [edit]
[-] ioremap.h [edit]
[-] memory_hotplug.h [edit]
[-] pci-epc.h [edit]
[-] io_uring_types.h [edit]
[-] alarmtimer.h [edit]
[+] raid
[-] acct.h [edit]
[-] page_counter.h [edit]
[-] page_ext.h [edit]
[-] perf_event.h [edit]
[-] bsearch.h [edit]
[-] dqblk_v1.h [edit]
[-] pageblock-flags.h [edit]
[-] mii.h [edit]
[-] page-isolation.h [edit]
[-] kernelcapi.h [edit]
[-] elf-randomize.h [edit]
[-] resctrl.h [edit]
[-] fs_pin.h [edit]
[-] crc32c.h [edit]
[-] smc91x.h [edit]
[+] lockd
[-] thunderbolt.h [edit]
[-] kvm_irqfd.h [edit]
[-] hiddev.h [edit]
[-] pid_namespace.h [edit]
[-] kallsyms.h [edit]
[-] inet.h [edit]
[-] sfp.h [edit]
[-] tracepoint.h [edit]
[-] serio.h [edit]
[-] fs_parser.h [edit]
[-] completion.h [edit]
[-] moduleloader.h [edit]
[-] acpi_iort.h [edit]
[+] netfilter_ipv6
[-] dm9000.h [edit]
[-] vexpress.h [edit]
[-] task_io_accounting.h [edit]
[-] io.h [edit]
[-] phylink.h [edit]
[-] fsl_hypervisor.h [edit]
[-] swab.h [edit]
[-] hdlc.h [edit]
[-] resume_user_mode.h [edit]
[-] microchipphy.h [edit]
[-] iomap.h [edit]
[-] relay.h [edit]
[-] bitops.h [edit]
[-] of_clk.h [edit]
[-] securebits.h [edit]
[-] part_stat.h [edit]
[-] tee_drv.h [edit]
[-] dw_apb_timer.h [edit]
[-] asn1.h [edit]
[-] nvme-fc.h [edit]
[-] profile.h [edit]
[-] tfrc.h [edit]
[-] tty.h [edit]
[-] vmstat.h [edit]
[-] tpm_command.h [edit]
[-] objagg.h [edit]
[-] mutex_types.h [edit]
[-] interconnect-provider.h [edit]
[-] pm_qos.h [edit]
[-] pagewalk.h [edit]
[-] iommu-helper.h [edit]
[-] vlynq.h [edit]
[+] dma
[-] btf.h [edit]
[-] mcb.h [edit]
[-] rbtree_types.h [edit]
[-] pci_hotplug.h [edit]
[-] mhi.h [edit]
[-] kprobes.h [edit]
[-] of_pdt.h [edit]
[-] nfs.h [edit]
[-] hugetlb_cgroup.h [edit]
[+] fpga
[-] mutex_api.h [edit]
[-] sizes.h [edit]
[-] bootconfig.h [edit]
[+] unaligned
[-] pch_dma.h [edit]
[-] crypto.h [edit]
[-] rh_kabi.h [edit]
[-] fanotify.h [edit]
[-] units.h [edit]
[-] f2fs_fs.h [edit]
[-] dnotify.h [edit]
[-] rbtree_latch.h [edit]
[-] compat.h [edit]
[-] irq_poll.h [edit]
[-] klist.h [edit]
[-] lsm_hook_defs.h [edit]
[-] ramfs.h [edit]
[-] nfs4.h [edit]
[-] acpi_amd_wbrf.h [edit]
[-] blkpg.h [edit]
[-] audit_arch.h [edit]
[-] kasan-tags.h [edit]
[-] agpgart.h [edit]
[-] compiler-clang.h [edit]
[-] splice.h [edit]
[-] crash_core.h [edit]
[-] vmcore_info.h [edit]
[-] arch_topology.h [edit]
[-] mm_types_task.h [edit]
[-] compiler-version.h [edit]
[-] binfmts.h [edit]
[+] bcma
[-] timekeeper_internal.h [edit]
[-] syscore_ops.h [edit]
[-] kobject_ns.h [edit]
[-] drbd.h [edit]
[-] ioport.h [edit]
[-] idle_inject.h [edit]
[-] ks8842.h [edit]
[-] bsg-lib.h [edit]
[-] dcache.h [edit]
[-] rio.h [edit]
[-] net.h [edit]
[-] crc4.h [edit]
[-] pci-ecam.h [edit]
[-] rcupdate_trace.h [edit]
[-] dccp.h [edit]
[+] netfilter_arp
[-] memory-tiers.h [edit]
[+] input
[-] ts-nbus.h [edit]
[-] spinlock_up.h [edit]
[-] kvm_host.h [edit]
[-] omap-iommu.h [edit]
[-] vringh.h [edit]
[-] serial_sci.h [edit]
[-] pm_clock.h [edit]
[-] seg6_hmac.h [edit]
[-] netfilter_defs.h [edit]
[-] mbcache.h [edit]
[-] init_syscalls.h [edit]
[-] cxl_err.h [edit]
[-] u64_stats_sync.h [edit]
[-] memremap.h [edit]
[-] ptdump.h [edit]
[-] hid-over-spi.h [edit]
[-] jz4780-nemc.h [edit]
[-] time32.h [edit]
[-] mdio-bitbang.h [edit]
[-] psp-sev.h [edit]
[-] fdtable.h [edit]
[-] suspend.h [edit]
[-] ktime_api.h [edit]
[-] atmdev.h [edit]
[-] bcm963xx_nvram.h [edit]
[-] fiemap.h [edit]
[-] fsl_ifc.h [edit]
[-] asn1_decoder.h [edit]
[-] netfilter_netdev.h [edit]
[-] resource.h [edit]
[-] cpumask.h [edit]
[+] gpio
[-] hidden.h [edit]
[-] clk-provider.h [edit]
[-] elfcore.h [edit]
[-] bpfptr.h [edit]
[-] bpf_local_storage.h [edit]
[-] errseq.h [edit]
[+] perf
[-] ppp_defs.h [edit]
[-] marvell_phy.h [edit]
[-] psp-tee.h [edit]
[-] livepatch_sched.h [edit]
[-] rw_hint.h [edit]
[-] pnp.h [edit]
[-] kcore.h [edit]
[-] arm-cci.h [edit]
[-] rio_regs.h [edit]
[-] init_ohci1394_dma.h [edit]
[-] moduleparam.h [edit]
[-] backing-dev.h [edit]
[-] export.h [edit]
[-] highuid.h [edit]
[-] bpf-netns.h [edit]
[+] hsi
[-] fcdevice.h [edit]
[-] blktrace_api.h [edit]
[-] rcu_notifier.h [edit]
[-] hypervisor.h [edit]
[-] falloc.h [edit]
[+] net
[-] reboot-mode.h [edit]
[-] container.h [edit]
[-] dio.h [edit]
[-] kcsan-checks.h [edit]
[-] nvmem-consumer.h [edit]
[-] kdebug.h [edit]
[-] softirq.h [edit]
[-] personality.h [edit]
[-] nsc_gpio.h [edit]
[-] rtsx_common.h [edit]
[-] task_work.h [edit]
[-] sched.h [edit]
[-] litex.h [edit]
[-] secretmem.h [edit]
[-] nfs_xdr.h [edit]
[-] ptp_pch.h [edit]
[-] pgtable.h [edit]
[-] sysfs.h [edit]
[-] hrtimer_api.h [edit]
[-] pseudo_fs.h [edit]
[-] mempool.h [edit]
[-] via_i2c.h [edit]
[-] pxa2xx_ssp.h [edit]
[-] virtio_pci_modern.h [edit]
[-] log2.h [edit]
[-] highmem-internal.h [edit]
[-] host1x.h [edit]
[-] mc146818rtc.h [edit]
[-] dmar.h [edit]
[-] rcuwait.h [edit]
[-] assoc_array_priv.h [edit]
[-] vbox_utils.h [edit]
[-] scx200_gpio.h [edit]
[-] timeriomem-rng.h [edit]
[-] sh_eth.h [edit]
[-] counter_enum.h [edit]
[-] memstick.h [edit]
[-] torture.h [edit]
[-] math64.h [edit]
[-] blk-pm.h [edit]
[-] kasan-enabled.h [edit]
[-] intel_tcc.h [edit]
[-] oid_registry.h [edit]
[-] crc-t10dif.h [edit]
[-] ref_tracker.h [edit]
[-] rwsem.h [edit]
[-] bvec.h [edit]
[-] gnss.h [edit]
[-] ipc_namespace.h [edit]
[-] ndctl.h [edit]
[+] byteorder
[-] cgroup_refcnt.h [edit]
[-] compiler_types.h [edit]
[-] enclosure.h [edit]
[-] stackleak.h [edit]
[-] perf_event_api.h [edit]
[-] via-gpio.h [edit]
[+] ceph
[-] kern_levels.h [edit]
[-] cpufreq.h [edit]
[-] time.h [edit]
[-] superhyway.h [edit]
[+] crush
[-] debugfs.h [edit]
[-] scmi_imx_protocol.h [edit]
[-] of_pci.h [edit]
[-] hwmon.h [edit]
[-] virtio_vsock.h [edit]
[-] lzo.h [edit]
[-] of_device.h [edit]
[-] tty_driver.h [edit]
[-] circ_buf.h [edit]
[+] netfilter_ipv4
[-] ieee80211.h [edit]
[-] idr.h [edit]
[-] mod_devicetable.h [edit]
[-] tsm.h [edit]
[-] cc_platform.h [edit]
[-] integrity.h [edit]
[-] omap-gpmc.h [edit]
[-] mei_cl_bus.h [edit]
[-] ptp_kvm.h [edit]
[-] cpu_pm.h [edit]
[-] mtio.h [edit]
[-] irq_sim.h [edit]
[+] ulpi
[-] ptrace_api.h [edit]
[-] rcu_sync.h [edit]
[-] huge_mm.h [edit]
[-] user_namespace.h [edit]
[-] list_nulls.h [edit]
[-] kcsan.h [edit]
[-] prandom.h [edit]
[+] usb
[-] migrate_mode.h [edit]
[-] btree.h [edit]